Do not attempt to open the probe body. There are no user
serviceable parts inside the probe body.
CAUTION!
2.4 ESD Protection
Electrostatic Discharge (ESD) can cause immediate or latent damage to electronic circuits.
Vaisala products are adequately protected against ESD for their intended use. However, it is
possible to damage the product by delivering an electrostatic discharge when touching,
removing or inserting any objects inside the equipment housing.
Avoid touching component contacts or connectors when working with the device.
2.5 Measured Parameters
Table 4 Available Parameters
Parameter Unit
Vaporized hydrogen peroxide concentration by
volume
ppm
Relative saturation (RS) (H
2
O + H
2
O
2
) %RS
Relative humidity (RH) (H
2
O) %RH
Temperature °C
Absolute hydrogen peroxide
mg/m
3
Absolute humidity (H
2
O)
g/m
3
Water concentration by volume ppm
Water vapor pressure hPa
Water vapor saturation pressure hPa
The probe provides both digital and analog outputs.
• In digital output mode, the probe outputs all the measurement parameters.
• In analog output mode, the probe outputs the readings of two measurement parameters
(one parameter in each analog output channel). These measurement parameters are
chosen at the time of ordering the probe, and you can change them using Insight
software and via Modbus. The probe is also compatible with Vaisala Indigo transmitters,
which provide the option of three analog output channels.
Chapter 2 – Product Overview
9
To Next Page
Loading...
Need help?
General
