Vaisala HPP272 User Manual

6. Vaisala Insight Software
Vaisala Insight software is a configuration software for Indigo-compatible probes. The
supported operating systems are Windows 7 (64-bit), Windows 8.1 (64-bit), and Windows 10
(64-bit).
With the Insight software, you can:
• See device information and status.
• See real-time measurement.
•
Configure serial communication settings, purge settings, filtering factor, and analog
output parameters and scaling.
• Calibrate and adjust the device.
Download Vaisala Insight software at www.vaisala.com/insight.
The probe can be connected to Vaisala Insight software using a Vaisala USB cable (no.
242659).
6.1
Connecting to Insight Software
• Computer with Insight software installed
• USB connection cable (no. 242659)
Figure 10 Connecting Probe to Insight
1. Open the Vaisala Insight software.
2. Connect the USB cable to a free USB port on the PC.
3. Connect the probe to the USB cable.
4. Wait for the Insight software to recognize and identify the probe.
HPP272 User Guide M211972EN-B
28

Vaisala HPP272 Specifications

General

Brand	Vaisala
Model	HPP272
Category	Measuring Instruments
Language	English