Vatech A9 User Manual

15. Appendices
162 vatech A9 (Model name: PHT-30CSS) User Manual
15.2 X-ray Dose Data
15.2.1 DAP (Dose Area Product)
The X-ray dose data is extracted from the X-ray Dose Test Report for vatech A9
(Model name: PHT-30CSS).
X-ray Dose Test Report for the vatech A9 (Model name: PHT-30CSS) maintains
dosimetric evaluation that the VATECH dental diagnostic system meets all
requirements specified in the IEC Collateral Standard. To limit unnecessary exposure
to the patient, operator, or other staff, vatech A9 (Model name: PHT-30CSS) is
designed to comply with IEC 60601-1-3 Part 1 General Requirements for Safety.
Test Hardware
Brand Name (Model)
vatech A9 (Model name: PHT-30CSS)
Sensor Type
PANO & CBCT: Xmaru1404CF-Plus
CEPH: Xmaru2602CF
X-ray Generator
DG-07F23T4
Tube
D-054SB
DAP (Dose Area Product) is a quantity used in assessing the radiation risk from
diagnostic X-ray examination procedures. It is defined as the absorbed dose multiplied
by the area irradiated, expressed in gray square centimeters (mGy·cm
2
). Despite the
limitation, DAP is the best way to predict effective dose value and is currently the most
convenient method for patient dose monitoring.
DAP (Dose Area Product) Calculation
When you need more information on DAP measurement
procedures or test results for the equipment, please contact
the VATECH service center or your local VATECH
representative and get assistance from VATECH-authorized
technicians

Vatech A9 Specifications

General

Brand	Vatech
Model	A9
Category	Medical Equipment
Language	English