PaX-Primo
40
3.3. Installing the touch pad screen on the wall (optional)
This section explains about the optional wall- mounted installation of the touch panel screen.
1. Have the finish cap (Acc. No.20) for the touch pad screen.
This step is required to cover the unused area that is no longer necessary,
because the touch pad screen would be installed on the wall, not on the unit
itself.
2. Fix the touch pad screen using M6*10 wrenches bolts (Accessory No.26x3) and from this step on,
procedures are the same as those of installation on the PaX-Primo unit itself.
To Next Page
Loading...
Need help?
General
