Page 10
Smart Sensor Status
Smart sensor status reports the status of the smart sensors
connected to the Smart Sensor/Press or Smart Sensor Module
and indicates if an alarm condition exists. To select smart sensor
status, press Function until you display the message:
To print a complete smart sensor status report, press Print. To
view the smart sensor status for a particular sensor, press Step
to display the message:
If the sensor is functioning properly and no alarm conditions
exist, the system displays the message SENSOR NORMAL.
SMART SENSOR STATUS
PRESS <STEP> TO CONTINUE
s#: (Location)
(Status Indicator)
Mag Sump Sensor Leak Test Results
In the operating mode, press Function until the display shows:
Press Step to display the message:
Press Print to printout the last passed Mag Sump Sensor leak test
results.
Press Step to display the message:
Press Print to printout the leak test history for this sensor which
shows the last test results and the last passed test for each year, up
to the last 10 years (if applicable).
MAG SUMP LK TEST RESULTS
PRESS <STEP> TO CONTINUE
s1: MM-DD-YY HH:MM XM
LAST PASSED TEST
s1: SUMP 1
PRESS PRINT FOR HISTORY
To Next Page
Loading...
Need help?
General
