2 For your safety
2.1 Authorised personnel
All operations described in this operating instructions manual
must be carried out only by trained specialist personnel
authorised by the operator. For safety and warranty reasons,
any internal work on the instruments must be carried out only
by personnel authorised by the manufacturer.
2.2 Appropriate use
PLICSCOM is a pluggable indicating and adjustment module
for VEGA level and pressure sensors.
2.3 Warning about misuse
Inappropriate or incorrect use of the instrument can give rise to
application-specific hazards, e.g. vessel overfill or damage to
system components through incorrect mounting or adjustment.
2.4 General safety instructions
PLICSCOM is a high-tech instrument requiring the strict
observance of standard regulations and guidelines. The user
must take note of the safety instructions in this operating
instructions manual, the country-specific installation standards
(e.g. the VDE regulations in Germany) as well as all prevailing
safety regulations and accident prevention rules.
2.5 CE conformity
The indicating and adjustment module is in CE conformity to
EMC (89/336/EWG) and NSR (73/23/EWG).
Conformity has been judged according to the following
standards:
l EMC:
- Emission EN 61326: 1997
- Susceptibility EN 61326: 1997 + A1:1998
l LVD: EN 61010-1: 2001
2.6 Compatibility according to NAMUR NE 53
PLICSCOM meets NAMUR recommendation NE 53.
Indicating and adjustment module PLICSCOM 5
For your safety
27835-EN-070123
To Next Page
Loading...
Need help?
General
