For instruments with national approvals such as e.g. according
to FM and CSA, this function only available at a later date.
The optional heating requires its own power supply. You can
find further details in the supplementary instructions manual
"Heating for indicating and adjustment module".
3.3 Operation
The adjustment is carried out via the integrated keys. The
entered parameters are generally saved in the respective
sensor. A copy function enables loading of the parameters into
the indicating and adjustment module.
3.4 Storage and transport
Your instrument was protected by packaging during transport.
Its capacity to handle normal loads during transport is assured
by a test according to DIN EN 24180.
The packaging of standard instruments consists of environ-
ment-friendly, recyclable cardboard. For special versions, PE
foam or PE foil is also used. Dispose of the packaging material
via specialised recycling companies.
l Storage and transport temperature see "Supplement -
Technical data - Ambient conditions"
l Relative humidity 20 … 85 %
Packaging
Storage and transport tem-
perature
Indicating and adjustment module PLICSCOM 9
Product description
27835-EN-070123
To Next Page
Loading...
Need help?
General
