100
Technical data
Fuel system
Fuel specification
The fuel must comply with national and international standards for commercially supplied fuels,
such as:
EN 590 (with national environment and cold requirements)
ASTM D 975 No 1-D and 2-D
JIS KK 2204
Sulfur content: Complying with legal requirements in each country.
Low density fuel (urban diesel in Sweden and city diesel in Finland) can cause a loss of up to 5% of power and an
increase in fuel consumption of about 2–3%.
Engine model
Engine model ...................................................... D12-300 D12-350 D12-400
Crankshaft power @ 1800 rpm, kW (hp) ........... 216 (294) 256 (348) 294 (400)
Max. torque @ 1000 rpm, Nm (lbf.ft) .................. 1461 (1078)
Max. torque @ 1200 rpm, Nm (lbf.ft) .................. 1592 (1174) 1814 (1338)
Max. torque @ 1400 rpm, Nm (lbf.ft) ..................
Engine model ...................................................... D12-450 D12-500 D12-550
Crankshaft power @ 1800 rpm, kW (hp) ........... 331 (450) 367 (499)
Crankshaft power @ 1900 rpm, kW (hp) ........... 405 (550)
Max. torque @ 1200 rpm, Nm (lbf.ft) .................. 2204 (1626) 2196 (1620)
Max. torque @ 1400 rpm, Nm (lbf.ft) .................. 2019 (1489)
General
After market designation .......................................... D12D-C MH
No. of cylinders and configuration ............................. in-line 6
Bore/stroke ............................................................... 131/150 mm (5.16/5.91in)
Displacement ............................................................ 12.13 l (740 in
3
)
Compression ratio .................................................... 17.5:1
Dry weight bobtail ..................................................... 1400 kg (3086 lb)
Dry weight with reverse gear MG5114SC ................ 1603 kg (3534 lb)
Low idle speed .......................................................... 525 (±10) rpm*
* At delivery, the idling speed is adjusted to 520 rpm.
If needed, the speed can be adjusted within the range 550–700 rpm (refer to page ).
Technical data according to ISO 8665.
To Next Page
Loading...
Need help?
General
