49
Operation
Extra equipment
Disengageable clutch
The clutch is disengaged when the lever is in position
(N) and engaged in position (F)
IMPORTANT! The engine speed must not ex-
ceed 800 rprm when engaging and disengaging.
The clutch should be given extra attention during the
first period of operation. Adjustment may be required
to compensate for disc wear. Refer to “Maintenance:
Accessories” when adjusting.
Flush and bilge pump
The bilge pump has a vacuum switch (1) that auto-
matically disengages the pump when water is no lon-
ger being drawn into the pump.
The flush and bilge pump are engaged and disen-
gaged from a switch that is normally located at the
main control position. The bilge pump can also be en-
gaged manually by holding down the lever 2 for about
20 seconds.
To Next Page
Loading...
Need help?
General
