e-Key panel
1 Press IGNITION, agreen light in the button
indicates that the ignition is on.
2 To start, press the START/STOP button once for
each engine.
Start/Stop panel
1 Press the START/STOP button for each engine.
Release the button as soon as the engine has
started.
NOTICE! If startup is not possible due to cold
temperature conditions, to override the default 10
second crank time, press the START/STOP button and
hold until engine startup.
Read the instruments and warm the
engine up
Allow the engines to idle for the first ten seconds.
Check that instruments and warning displays show
normal values.
Check that no messages are displayed and no warning
signs are showing. If a fault is registered, please refer
to section Fault handling, page 87 for further
information and recommended actions.
Warm the engine up at low speed and low load, so
normal operating temperature is reached before full
power is used.
IMPORTANT:
Never race the engine when it is cold.
Racing the engine when it is cold can damage the
engine components and decrease the engine lifetime.
Starting
76 47713726 12-2021 © AB VOLVO PENTA
To Next Page
Loading...
Need help?
General
