Station Handling for Type Approved
Installation
There are three different types of helm station a boat
can be steered from.
Local station
The local helm station has superiority over both the
main helm station and remote helm station. The local
helm station is always able to take over control from
another active helm station without unlocking the
active helm station first.
If there is an additional local helm station that is active
it must first be unlocked in order to transfer control to
another local helm station.
Main station
The main helm station has superiority over the remote
helm station but is subordinate to the local helm
station.
In order for the main helm station to take control from
an active local helm station or another main helm
station the active helm station must be unlocked first.
The main helm station can take control from a remote
helm station without unlocking the remote helm
station.
Remote station
The remote helm station is subordinate to the local
helm station and the main helm station.
The active helm station must first be unlocked in order
to activate the remote helm station.
Transfer under way
Transfer under way
1 To change helm station with the levers in forward
position, press the STATION button (2) on the
active station. The pad lock (3) goes out on all helm
stations.
2 Activate the helm station that is to take control by
pressing the STATION button. The green LED will
light up and the N-LEDs (1) on the first station will
flash.
3 Move the levers on the control on the helm station
that have assumed control until they arrive at the
position of the levers on the first station. The station
will not be active until the levers are synchronized
with engine speed and gear.
4 If the levers do not correspond while the N-LEDs led
are flashing, the transfer will be interrupted and the
gear will move to neutral, the engine idles. Levers
must be in neutral position to gain control.
Operation
47713726 12-2021 © AB VOLVO PENTA 81
To Next Page
Loading...
Need help?
General
