03 Advanced user settings
Set destination
03
48
Address
Set destination Address
Enter street address
The system places the cursor on Street
(Street) first. The last Country (Country)
selected is preselected.
If not:
1.
Scroll to
Country (Country) and/or City
(City) and press ENTER.
2. Or choose from the latest options selected
by pressing
.
(For information on how the keyboard is used,
see page 25.)
NOTE
The system starts with Street in order to
avoid misunderstanding when two nearby
cities/localities have grown together.
Alternatives 1
±
Select
Street (Street) without selecting a
city.
If the street appears in several cities, a list will
be displayed offering you alternatives to
choose from. The system guides you to the
middle of the street selected.
Alternatives 2
1.
Start by selecting City.
2.
Then select Street.
NOTE
The definition of city or area can vary from
country to country, and also within the same
country. In some cases a metropolitan area
is indicated - in others an individual suburb.
No street addresses have been entered in the
system for small locations. It is always possible
to choose the centre of the place as a destina-
tion.
Specify street number
If the selected address has a street number,
this can be entered in order to specify the des-
tination more precisely.
±
Scroll to the line for
Number after entering
the street address, then press ENTER.
If the street number is not specified then the
system guides to the middle of the selected
street.
Alternatively:
1. Enter the required street number.
> Alternative street numbers are dis-
played.
2.
Scroll to
Select and press ENTER.
Cancel
Go back to previous screen.
To Next Page
Loading...
Need help?
General
