VTech 15750 User Manual

108
To change the remote access code:
Press
MENU idle mode to enter the main menu.
Press
or to highlight Answering sys, then press
SELECT.
Press
or to highlight Ans sys setup, then press
SELECT.
Press
or to highlight Remote code, then press
SELECT.
Use the dialing keys to enter a two-digit number.
Press
SAVE
Note: Remote access can only be used if this function
is activated.
MEssAGE ALERT TONE
When the message alert tone is set to On, and there is
at least one new message, the telephone base beeps
every ten seconds.
Unless you change it, the message
alert tone is set to off.
There is no audible alert at the handset.
To turn the message alert tone on or off:
Press MENU idle mode to enter the main menu.
Press
or to highlight Answering sys, then press
SELECT.
Press or to highlight Ans sys setup, then press
SELECT.
1.
2.
3.
4.
5.
6.
1.
2.
3.

VTech 15750 Specifications

General

Brand	VTech
Model	15750
Category	Cordless Telephone
Language	English