VTech 15750 User Manual

43
AUTO CONNECTION
When an active device moves within Bluetooth range
of the telephone base, or is turned on within range, the
telephone base tries to connect to the device. When
the device moves out of range, it is disconnected. Your
device might make a connect or disconnect sound.
A connected device could also be disconnected by:
Turning off the Bluetooth device.
Turning off the Bluetooth feature of the device.
Disconnecting through the telephone base Device list.
If you disconnect through the Device list, the telephone
base will not attempt to reconnect until your device
is moved out of range and then moves back in range
again.
bLUETOOTH CONNECTION fROM IDLE MODE
When you have active devices that are not connected,
CONNECT appears on the screen in idle mode. Press
CONNECT to start connecting an active device. When
there are two active devices, the screen will prompt you
to choose one before connection.
•
•
•

VTech 15750 Specifications

General

Brand	VTech
Model	15750
Category	Cordless Telephone
Language	English