119
Notes:
If you want to cancel an intercom call and reconnect
to the outside call before the destination handset
answers, press
OFF/CLEARCLEAR on the originating
handset..
If the called device is not answered within 100
seconds, or accessing the phonebook or call log, or
is on a call, or is out of range, the initiating device
shows No answer. Try again.
•
•
ONE-TOUCH bROADCAsT (OTb)
You can directly broadcast messages to the
speakerphone of any handset. Press and hold OTB on a
handset begin two-way communication.
Only one device can talk at a time. While talking to
another handset, press and hold OTB on the handset.
You must release OTB on the handset, so the other
person can respond.
Only one OTB session can be active at a time.
While OTB is in use between two handsets, other
handsets cannot use the intercom feature but can
access the answering system.
When you attempt to place a broadcast call to
another device which is accessing the answering
system or on an intercom call or outside call, your
device screen shows Not available at this time.
Note: The OTB function is not available when QUIET
mode is on.
•
•
•
•
•
To Next Page
Loading...
Need help?
General
