3
Getting started
Baby unit installation options
The baby unit is ready for tabletop use. Use the provided wall
mount if you want to mount it on a wall. Make sure to test the
reception and the baby unit position before completing the wall
mounting installation (see Test your baby monitor before use
on page 21).
Tabletop to wall mount installation
Check for reception strength and camera angle before drilling
the holes.
Pan or tilt to adjust the baby unit angle.1.
Use a pencil to mark two holes in parallel. Make sure
they are the same distance apart as the wall mount at the
bottom of the baby unit.
2.
To Next Page
Loading...
Need help?
General
