21
Getting started
Operating range
The operating range of the baby monitor is up to 300 metres
outdoors or 50 metres indoors. The actual operating range
may vary depending on the environmental conditions,
and other interferences such as walls, doors, and other
obstructions.
Audio settings
The baby unit may not detect sounds when the sensitivity
level is set below a certain level. You may need to increase
the sensitivity level (see pages 24 and 25).
You may need to turn the speaker volume louder on the
parent unit to hear the sounds transmitted from the baby unit
(see page 22).
It is the caregiver’s responsibility to stay close enough to take
care of any eventuality.
Test your baby monitor before use
You may test the baby monitor before initial use, and at regular
times thereafter.
To test your baby monitor:
Place the parent unit and the baby unit in the same room
to test the product. Make sure the baby unit are at least
1 metre away from the parent unit.
Press and hold to turn on the baby unit. The POWER
light turns on.
Press to turn on the parent unit. The screen turns on.
If both units are not connected, the parent unit displays
while searching for the baby unit. If no baby unit is found after
a while, it displays .
1.
2.
3.
To Next Page
Loading...
Need help?
General
