VTech CD1261 User Manual

Getting started
9
Rotate the bracket 180
degrees to the tabletop
position. Insert the tabs on
the bracket into slots
c
and
d
on the base, then push
the bracket downwards until it
clicks into place.
3.
Route the telephone line cord through
the channel as show below. Plug the
other end of the telephone line cord into
a telephone wall jack. Put the telephone
on the table and then place the handset
back on the telephone base.
4.
Hold the telephone base with both
hands with the bottom of the telephone
base facing towards you, then slide the
bracket downwards until it detaches
from the telephone base.
2.
PUSH
TO RELEASE
Tabletop installation
To return the bracket from wall installation to tabletop position, remove the
telephone from the wall mount bracket and unplug the telephone line cord from
the wall jack, then follow the instructions below.
Lift the handset and place it
aside. On the telephone base,
press and slide the handset
cradle tab upwards until it is out
of the slot. Rotate the tab so that
the end with the hook is down.
Then insert the tab back into its
slot until it clicks into place.
1.
PUSH
TO RELEASE
PUSH
TO RELEASE
PUSH
TO RELEASE
c
d
PUSH
TO RELEASE

VTech CD1261 Specifications

General

Brand	VTech
Model	CD1261
Category	Telephone
Language	English