Memory
18
Storing a number in a speed dial location
You can store up to 10 telephone numbers in the speed dial locations
(MEMORY 0 - MEMORY 9). Each number can be up to 32 digits.
To store a number in a speed dial location:
Lift the handset and press PROG.
Use the dial pad keys to enter the number you want to
store. Press PAUSE/REDIAL once to store a 3-second
pause in the dialing sequence, twice for a 6-second
pause and so on.
- OR -
Press PAUSE/REDIAL to store the last number dialed.
Press MEMORY, then press a dial pad key
(0 through 9) where you want the number to be stored.
The screen displays A0 if you store the number in
MEMORY 0. Then the telephone automatically returns to idle mode.
Reviewing a number stored in a speed dial location
Lift the handset and hold the switch hook on the handset.
Press MEMORY, then press a dial pad key (0 through 9) where you stored
the number. The number stored in the speed dial location is displayed on the
screen.
Dialing a number stored in a speed dial location
Lift the handset and wait for a dial tone.
Press MEMORY, then press a dial pad key (0 through 9) where the desired
number is stored.
1.
2.
3.
1.
2.
1.
2.
12:00
AM
1/01
Pro
2677377
12:00
AM
1/01
A0 Pro
2677377
Dialing a number stored in a one-touch location
Lift the handset and wait for a dial tone.
Press a one-touch key where the number is stored (M1, M2 or M3).
1.
2.
If you do not press any key in 10 seconds, the telephone returns to idle mode.
Numbers stored will be lost if the telephone line cord is unplugged from the
telephone wall jack and there is no battery power for more than 10 minutes.
To Next Page
Loading...
Need help?
General