VTech VS112-2 User Manual

27
Option while on a call
When you are on a home or cell call
and speaking to the caller, and you
do not want to continue the call, you
can press VOICE/ CALL BLOCK (For
VS112-0 / VS112 Series only) to end
the call. The telephone plays the block
announcement “The number you are
calling is not accepting your call. Please
hang up.” to the caller, and the call will
be terminated. The caller’s number, if
available, will be added to your block
list.
• Press VOICE/ CALL BLOCK (For
VS112-0 / VS112 Series only) on the
handset or telephone base. The
screen displays Block and end? and
the
• caller’s number, if available. Press
MENU/SELECT to end the call.
NOTE
• You can press VOICE/ CALL BLOCK
(For VS112-0 / VS112 Series only) to
end the call even if Smart call blocker
is turned off.
Join a call
Join a call in progress
Another handset can join you on home
call. The call continues until all parties
hang up. You can share an outside call
with up to two system devices.
• When a handset is already on a call,
• press or on another
handset to join the call.
• Press or place the handset
in the telephone base or handset
charger to exit the call. The call
continues on the other handset until
both handsets hang up.
NOTE
• If you have paired a DECT 6.0
cordless headset or speakerphone
to the telephone base, you can also
join a call in progress using the paired
device. Refer to the user’s manuals
of the respective product for more
information.
Intercom
Initiate an intercom call
1. Press MENU/SELECT on the handset
in idle mode.
2. Press p/q to highlight Intercom,
then press MENU/SELECT .
3. The screen displays Intercom to:.
Use the dialing keys to enter a device
number (1-5). The handset shows
Calling HS X. The destination handset
rings and shows HS X is calling.
Answer an intercom call
Press or or any dialing keys
( 0-9 or or QUIET#). Both
handsets now show Intercom.

VTech VS112-2 Specifications

General

Brand	VTech
Model	VS112-2
Category	Cordless Telephone
Language	English