VTech VS112-2 User Manual

59
NOTES
• For home calls that are “out of area”,
“Private”, or without caller ID, only
options 1 and 4 will be available.
The telephone announces “To
answer the call, press 1. To send this
call to the answering system, press
4. To repeat these options, press *”.
• If you select option 4 to send the
call to the answering system, the
caller can leave a message even if
the answering system is off.
• When the telephone is ringing, you
can press MUTE/DELETE to mute
the ringer temporarily.
Block calls | Call block list
Add a call block entry
1. Press MENU/SELECT to enter the
main menu when it is not in use.
2. Press p/q to scroll to Smart call blk,
then press MENU/SELECT.
3. Press p/q to scroll to Block list, and
then press MENU/SELECT.
4. Press p/q to scroll to Add new
entry, then press MENU/SELECT.
5. When the screen displays Enter
number, use the dialing keys to enter
a number (up to 30 digits).
• Press p/q to move the cursor to
the left or right.
• Press MUTE/DELETE on the
handset to erase a digit.
• Press and hold MUTE/DELETE on
the handset to erase all digits.
• Press and hold REDIAL/PAUSE
to enter a three-second dialing
pause (a P appears).
-OR-
Copy a number from the redial list by
pressing REDIAL/PAUSE. Then, press
p/q or REDIAL/PAUSE repeatedly
to find the desired number. Press
MENU/SELECT to copy the number.
6. Press MENU/SELECT to move on to
the name.
• The screen shows Number
repeated if the number is already
in the block list. You cannot save
the same number twice.
7. When the screen displays Enter

VTech VS112-2 Specifications

General

Brand	VTech
Model	VS112-2
Category	Cordless Telephone
Language	English