VTech VS112-2 User Manual

29
• Only one intercom call can be
established at a time.
Sound
Use speakerphone
During a call, press to switch
between the speakerphone and normal
handset use.
To hand up, press or return
the handset to the telephone base or
charger.
Mute the microphone
Use the mute function to turn off the
microphone. You can hear the caller,
but the caller cannot hear you.
To mute a call
While on a call, press MUTE/DELETE on
the handset. The screen displays Muted
until the mute function is turned off.
To end mute a call
Press MUTE/DELETE on the handset
again and resume speaking. The screen
briefly displays Microphone on.
Mute is automatically cancelled when
you end the call.
Temporary ringer silencing
When the telephone is ringing, you can
temporarily silence the ringer of the
handset without disconnecting the call.
The next call rings normally at the preset
volume.
To silence the handset ringer
Press or MUTE/DELETE on the
handset. The handset screen shows
Ringer muted.
Find handset
Page/ find handset
This feature helps you find all system
handsets.
To start paging
Press /FIND HANDSET on the
telephone base when it is not in use. All
idle handsets ring and display ** Paging
**.
To end paging
• Press , , , or
any dialing key (0-9, or
QUIET#) on the handset ;
-OR-
• Press /FIND HANDSET again on
the telephone base;
-OR-
• Place the handset in the telephone
base or charger.
NOTES
• If you press MUTE on a handset, the
ringer of that handset is silenced but
the paging tone continues on the
other handsets.
• If a handset is accessing the

VTech VS112-2 Specifications

General

Brand	VTech
Model	VS112-2
Category	Cordless Telephone
Language	English