77
or turn it off.
If you turn off the key tone, there are no
beeps when you press keys.
To set the key tone
1. Press MENU/SELECT in idle mode.
2. Press p/q to highlight Settings,
then press MENU/SELECT.
3. Press p/q to highlight Key tone,
then press MENU/SELECT.
4. Press p/q to select On or Off.
5. Press MENU/SELECT to confirm.
Voicemail settings
Set speed dial voicemail number
This feature lets you save your voicemail
number for quick access when you
press and hold the key.
To set your voicemail number
1. Press MENU/SELECT in idle mode.
2. Press p/q to highlight Settings,
then press MENU/SELECT.
3. Press p/q to highlight Voicemail #,
then press MENU/SELECT.
4. Use the dialing keys to enter the
voicemail access number (up to 30
digits) provided by your telephone
service provider.
• Press p/q to move the cursor to
the left or right.
• Press MUTE/DELETE on the
handset to erase a digit.
• Press and hold MUTE/DELETE on
the handset to erase all digits.
• Press and hold REDIAL/PAUSE
to enter a three-second dialing
pause (a P appears).
5. Press MENU/SELECT to confirm.
Add and register handset
You can add new VS112-17/VS112-
27/VS112-37/VS112-47 handsets
(purchased separately) to your VS112/
VS112-2/VS112-3/VS112-4 telephone
system. Your telephone system
supports a maximum of 5 handsets.
Each handset must be registered with
the telephone base before use. When
first purchased, each expansion handset
displays To register HS... and ... see
manual alternately.
NOTES
• Charge the new handset without
interruption for at least 30 minutes
before registering it to the telephone
base.
• You cannot register a handset if any
other system handset is in use.
To register a handset to VS112/VS112-
2/VS112-3/VS112-4 telephone base
1. Put the handset you wish to register
on the telephone base cradle.
2. The handset shows Registering....
If the registration is successful, the
handset screen displays Registered
and beeps. The handset is now
registered with the telephone base.
To Next Page
Loading...
Need help?
General
