70
5. To edit the name:
• Press p/q to move the cursor to
the left or right.
• Press 0 to add a space.
• Press MUTE/DELETE on the
handset or X on the telephone
base to erase a character.
• Press and hold MUTE/DELETE on
the handset or X on the telephone
base to erase all characters.
• Press to change the next
letter to upper or lower case.
6. Press MENU/SELECT to confirm. You
hear a confirmation tone.
Review block list
1. Press MENU/SELECT to enter the main
menu when the handset is not in use.
Then, press p/q to scroll to Smart
call blk. Press MENU/SELECT.
2. Press p/q to scroll to Block list, and
then press MENU/SELECT.
3. Press MENU/SELECT to choose
Review.
4. Press p/q to browse through the
star name entries.
NOTE
• List empty appears if there are no
block entries.
Answering system settings
Set your built-in answering system
The answering system can record and
store up to 99 messages. Each message
can be up to 3 minutes in length. The total
storage capacity for the announcement,
messages and memos is approximately
22 minutes. The actual recording
time depends on individual message
characteristics. Messages remain
available for replay until you delete them.
If the answering system has less than 3
minutes of recording time left, “Less than
3 minutes to record” is announced before
the message playback and Rec mem low
appears on the handset screen.
If the memory is full, the answering system
announces, “Memory is full.” The number
To Next Page
Loading...
Need help?
General
