8-2 BA D24 en/us* 1.0 * D24_1_0_800.fm
8 Malfunctions
8.3 General malfunctions
Malfunction Possible cause Remedy See
Engine does not start or is not easy to
start
Empty fuel tank Refueling 7-18
Malfunctioning or empty bat-
tery
Replace the battery 7-32
Malfunctioning fuse Check the fuse 9-7
Electric feed pump is not run-
ning
Contact a Wacker Neuson
service center
--
Travel direction selected
Do not select a travel direc-
tion
Service brake not actuated Service brake actuated
Swivel console not locked into
place
Lock swivel console into
place
Machine travel cannot be started
Parking brake applied Release the parking brake 5-3
No travel direction selected Select a travel direction 5-6
Engine speed too low Press the accelerator pedal 5-2
Operator is not sitting on the
seat and operator presence
switch is enabled
Sit down on the seat 4-4
Malfunctioning operator pres-
ence switch (option)
Contact a Wacker Neuson
service center
--
Temperature of traveling drive
is too low
Let the machine run warm
Swivel console not locked into
place
Lock swivel console into
place
Reduced drive output
Technical defect
Contact a Wacker Neuson
service center
--
Oil temperature too low Let the engine run warm
Operating temperature too
high
Let the engine cool down at
idling speed and then contact
an authorized service center
--
Maintenance not performed Perform maintenance --
To Next Page
Loading...
Need help?
General
