BA D24 en/us* 1.0 * D24en_us_1_0_200c.fm 2-3
Safety 2
Preparatory measures for the operator
• Before starting, check the vehicle whether it can be driven and
operated safely.
• Tie back long hair and remove all jewelry.
• Wear close-fitting work clothes that do not hinder movement.
2.3 Conduct
Prerequisites for operation
• The vehicle has been designed and built in accordance with state-of-
the-art standards and the recognized safety regulations.
Nevertheless its use can cause danger to the operator or third parties,
or damage to the vehicle.
• Store this Operator’s Manual in the place provided for this in or on the
vehicle. Immediately replace a damaged or illegible Operator’s Manual
and any supplements to it.
• The vehicle must only be operated in accordance with its designated
use and the instructions set forth in this Operator’s Manual.
• The operator and owner are obligated not to put a damaged or
malfunctioning vehicle into operation or operate it.
- If a damage or malfunction occurs during operation, put the vehicle
out of operation immediately and secure it against restart.
- Have all malfunctions jeopardizing the safety of the operator or third
parties immediately repaired by an authorized service center.
• Do not put the vehicle into operation or operate it after an accident;
have it inspected for damage by an authorized service center.
- Have the seat belt replaced by an authorized service center after an
accident, even if there is no visible damage.
- Cabin and protective structures
• Remove all dirt, snow and ice from climbing aids (for example from the
handholds, footholds, handrails).
• The owner is responsible for requiring the operating and maintenance
personnel to wear protective clothing and equipment as required by the
circumstances.
To Next Page
Loading...
Need help?
General
