WM 80 Repair Disassembly and Assembly
wc_tx000523gb.fm 105
10.3 Ordering Parts
The repair procedures contained in this manual do not include part
numbers. For parts replacement information, refer to the Parts Book
originally supplied with the machine.
If the original Parts Book has been lost, a replacement may be ordered
from Wacker Neuson Corporation. When ordering a replacement Parts
Book, please list the model number, item number, revision level, and
serial number of the machine. Parts Books are also available on the
Wacker Neuson Corporation Web site. See www.wackerneuson.com.
Enter the site as a visitor.
10.4 Reference Numbers ( )
Repair procedures contain reference numbers enclosed in
parentheses ( ). These numbers refer to the item numbers shown on
the assembly drawings and other detailed drawings. They are included
to aid the mechanic in identifying parts and assembling components.
10.5 Threadlocking Compounds
Due to the heavy vibration inherent in this type of equipment, the repair
and service procedures described in this manual specify the use of
threadlocking compounds. These compounds should be used where
indicated to prevent the fasteners from becoming loose.
Although Loctite® is referred to throughout this manual, any equivalent
type of sealant such as Hernon, Prolock, or Omnifit may be used.
Clean the screw threads and wipe off any oil or grease before applying
a threadlocking compound.
For a complete list of recommended sealing and locking compounds,
refer to the Use of Threadlockers and Sealants chart at the end of this
Repair Manual.
To Next Page
Loading...
Need help?
General
