EasyManuals Logo
Home>Wacker Neuson>Engine>WM 80

Wacker Neuson WM 80 User Manual

Wacker Neuson WM 80
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
Maintenance WM 80
22 wc_tx000520gb.fm
3.4 Cartridge-Type Air Filter
See Graphic: wc_gr002875
3.4.1 This type of air filter is found on rammers with Bing carburetors and on
early rammers with Tillotson carburetors. To service:
3.4.2 Unsnap the spring clips (1) on the protective cover (2) and remove the
filter element (3).
3.4.3 Inspect the paper filter element and replace it if it appears wet, heavily
soiled, or torn.
3.4.4 Inspect the condition of the rubber seals (4) on each end of the
element. Replace the element if the seals are damaged or deformed.
3.4.5 The element can be cleaned by tapping it against a firm surface. Take
care not to damage the seals or puncture the filter paper when
cleaning the filter. Do not use cleaning agents or solvents to clean the
filter.
3.4.6 Clean and inspect the seating surfaces on the mounting base (5) and
inside of the protective cover. Replace any damaged parts. Lightly oil
filter the seals and install the element.
wc_gr002875
1
2
3
4
5

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Wacker Neuson WM 80 and is the answer not in the manual?

Wacker Neuson WM 80 Specifications

General IconGeneral
BrandWacker Neuson
ModelWM 80
CategoryEngine
LanguageEnglish

Related product manuals