25
EPG-SPRINT / EPG-SPRINT X
SERVICE MANUAL
VERSION 09/2017 ORDER NUMBER DOC2309350
18 LED display: "Flush"
– Lights up blue, when the ush function is activated
19 LED display: 7 segments, three-digit number
– Indicates the exact value depending on the activated function:
"Total air volume; atomizing, ionizing and Tribo air; additional recipes; high voltage;
current limitation; powder quantity; Tribo current"
– Display showing error number in the event of warnings and malfunctions
20 Push button: "Total Air Volume"
– To activate the function, the value is precisely adjusted with rotary controller 24
and is indicated in LED display 19
– Adjusting range: 1-6 m³/h
– Resolution: 0.05 m³/h
21 Push button: "Atomizing, Ionizing and Tribo Air"
– To activate the function, the value is precisely adjusted with rotary controller 24
and is indicated in LED display 19
– Adjusting range: 0.05-4 m³/h
– Resolution: 0.05 m³/h
22 LED display: "Total Air"
– Lights up yellow, when the setting "Total Air" is selected
23 LED display: "Atomizing, Ionizing and Tribo Air"
– Lights up yellow, when the setting "Atomizing, Ionizing and Tribo Air" is selected
24 Universal control dial
– Dynamic digital control dial with 32 positions per revolution
– Adjustment speed is proportional to rotational speed
– Used to set: "Total air volume; atomizer, ionizer and Tribo air; additional recipes;
high voltage; current limitation; powder quantity"
– For setting parameter values in con guration mode
25 Push button: "Additional Recipes"
– To activate the function, the additional recipe is set with the rotary controller 24
and is indicated in the LED display 19
– Selection of the recipes 5 to 50
26 LED display: "Additional Recipes"
– Lights up yellow, when an additional recipe is selected
27 Push button "High voltage"
– To activate the function, the high voltage is set with rotary controller 24 and is
indicated in LED Display 19
– Adjusting range: 10-100 kV
– Resolution: 1 kV
To Next Page
Loading...
Need help?
General
