wallas 4430 User Manual

Operation
en
Resetting the factory settings (Reset)
It is possible to restore the factory settings.
Proceed as follows:
• Disconnect the power source.
• Press the button “RELAY1” and keep it down.
• Connect the unit to the power source and keep the button down for at least 10
seconds.
• Release the button.
• The factory settings have now been restored.
In order to control the unit remotely via web browsers you will have to restart the
unit for a GPRS link (after resetting).
Proceed as follows:
• Loginusingyourpasswordsatremote.wallas.
• Choose the tab “Heater settings”
• Press the button [Update heater settings]
• Validation of the unit takes a couple of minutes; after the validation you will
receiveaconrmationtoyoure-mailandagreenP symbol is displayed on the
screen.
• The unit is now ready for use.
D30061
- 46 -
4430
490538

wallas 4430 Specifications

General

Brand	wallas
Model	4430
Category	Remote Control
Language	English