en
Quick guide
1. Switch off the main power from the heater (disconnect the
accumulator cable)
2. On web page remote.wallas. check that the SIM card opera-
tor is included in the tested operator list.
3. Check that the PIN code request of the SIM card is disabled.
If necessary, disable it.
4. Install the SIM card in the remote control
5. Connect the remote control to the heater’s operating switch
GSM aerial interface
6. Install and connect the aerial
7. Switch of the heater’s main power
8. Ensure that the green LED light starts ashing with 7 sec
intervals
9. Register as a user on the web page remote.wallas. by using
the instructions on the screen
10. Save the control page as a bookmark (ask to conrm your
password), this facilitates the use of the remote control
D30081
- 29 -
To Next Page
Loading...
Need help?
General
