Instructions for Assembly
Item number 116523-0000
We reserve the right to make technical
changes
Version 4 01.04.2014 Page 6/49
Opal Design II / Opal Design II LED
2 Safety notes
Personal injury
Risk of personal injury due to improperly installed awning.
Please read and observe the safety notes contained in this section.
Product and property damage
Risk of damage to the product and property due to improperly installed awning.
Please read and observe the safety notes contained in this section.
2.1 Fundamental safety notes
The assembly and operating instructions must be read and observed.
Observe the corresponding accident prevention regulations.
Ensure when installing the awning that all existing electrical connections are disconnected.
Cordon off a large space around the installation site.
Check that all scaffolding and building facilities are duly safe and secure.
Observe the stipulations relating to dowels and fixing materials.
Only work with fully intact and appropriate tools.
Keep plastic sheeting, packaging material and small parts away from children – risk of
suffocation!
2.2 Qualifications
The assembly instructions are aimed at qualified technicians who have knowledge of and are
experienced in the following areas:
Safety at work, operating safety and accident prevention regulations
Use of ladders and scaffolding
Handling and transporting long, heavy components
Handling and transporting glass panes
Handling tools and machines
Fitting the fixing materials
Assessment of building fabric
Start-up and operation of the product.
If one of these qualifications is lacking, a qualified assembly firm must be brought in.
2.2.1 Working with electricity
In accordance with VDE 100 safety regulations, electrical work may only be carried out by an
authorised electrician. The installation instructions accompanying the supplied electrical
equipment must be observed.
CAUTION
DANGER
To Next Page
Loading...
Need help?
General
