7.3.4 Changing washing programme
Select a new washing programme.
The symbol for the washing programme appears in the display.
Close the hood.
The washing programme is started.
7.3.5 End of the programme
The display flashes green, as soon as the washing programme has ended and the hood remains unopened.
7.3.6 Prematurely terminating the washing programme
A washing programme can be terminated in the following ways:
Press the start button
Press the On/Off button.
7.3.7 Periods of disuse
Do not switch the machine off during periods of disuse.
Close the hood as far as the detent position to prevent it cooling down.
7.4 Switching off
Switch the machine off at the end of the working day using the self-cleaning programme ( 8.1.2), so that it
is cleaned and emptied every day.
INFO If you use the On/Off switch, the tank stays filled but will no longer be kept at temperature. If the
tank temperature has dropped too much before the machine is switched on again, the tank will be
emptied automatically and filled again.
8 Servicing and maintenance
Do not spray the machine and the surrounding area (panels, base) using a water hose,
steam-jet air ejector or high-pressure cleaner.
Ensure that the base of the machine is not flooded when cleaning the floor in order to pre-
vent an uncontrolled inflow of water.
Wear protective clothing and protective gloves before touching parts in contact with detergent
solution (filters, rotating wash fields, ...)
To Next Page
Loading...
Need help?
General
