Winterhalter PT 500 User Manual

Taking the machine out of service for a long period
25
16.3 Changing the settings
Retrieving the settings
 Press the following buttons in turn:
3x
Enter "1575"
(change the values with the and
buttons and confirm with the
button)
 The setting (detergent) is displayed (number
flashes).
 Change with the and buttons.
 Confirm with the button.
 The input is confirmed.
 The setting (rinse aid) is displayed (number
flashes).
 Change with the and buttons.
 Confirm with the button.
 The input is confirmed.
 The new setting (rinse aid) is displayed
(number flashes).
 Press the button to go back.
 1x: The setting (detergent) is displayed
(number flashes).
 2x: The output screen is displayed.
 3x: Exit the PIN menu.
17 Taking the machine out of service for a long period
Follow the notes if the machine needs to be out of operation for a long duration (holidays, seasonal business).
 Empty the machine using the self-cleaning programme ( 8.1.2).
 Clean the machine ( 8.1.3 and 8.1.4).
 Leave the hood open.
 Close the on-site water stop cock.
 Switch off the local mains disconnector.
If the machine is in a place that is not frost-free:
 Instruct an authorised service technician to make the machine frost-resistant.
18 Putting the machine back into service after a long period of disuse
 Open the on-site water stop cock.
 Switch on the local mains disconnector.
 Switch on the machine.
If the machine was in a place that was not frost-free:
After extended periods of disuse, the machine must be completely climatised (at least 24 hours at 25 °C). If
this requirement is met:
 Contact an authorised service technician to put the machine back into service.

Winterhalter PT 500 Specifications

General

Brand	Winterhalter
Model	PT 500
Category	Dishwasher
Language	English