Winterhalter PT 500 - Manual Introduction and Safety

About this manual
1
Operating instructions
for Winterhalter PT-500 rack pass-through dishwasher
(translation of the original German operating instructions)
Table of contents
1 About this manual -------------------------------- 2
2 Safety notes ---------------------------------------- 2
2.1 Proper use ------------------------------------------- 2
2.2 Improper use ---------------------------------------- 2
2.3 Electrical Safety ------------------------------------ 3
2.4 Safety Instructions for Maintenance and
Repairs ----------------------------------------------- 3
2.5 General safety notes ------------------------------ 3
3 Before working with the machine ----------- 3
4 Product description ------------------------------ 4
4.1 Mode of operation ---------------------------------- 4
4.2 Overview --------------------------------------------- 4
4.3 Operating panel and washing programmes - 5
5 Rinse aid and detergent ------------------------ 5
5.1 Rinse aid --------------------------------------------- 5
5.2 Detergent --------------------------------------------- 6
5.3 Suction tube with level control ------------------ 6
5.4 Changing the detergent product ---------------- 7
5.5 Priming the dosing devices ---------------------- 7
6 Integral water softener (special
equipment) ------------------------------------------ 7
6.1 Lack of salt display--------------------------------- 7
6.2 Filling regeneration salt --------------------------- 8
7 Operation -------------------------------------------- 8
7.1 Before switching on the machine --------------- 8
7.2 Switching on the machine and preparing it
for operation ----------------------------------------- 8
7.3 Washing ---------------------------------------------- 9
7.4 Switching off ---------------------------------------- 10
8 Servicing and maintenance ------------------ 10
8.1 Daily cleaning -------------------------------------- 10
8.2 Weekly cleaning ----------------------------------- 12
8.3 Monthly cleaning ---------------------------------- 12
8.4 Maintenance by the Customer Service ------ 12
9 Malfunctions -------------------------------------- 13
9.1 Poor cleaning result ------------------------------ 14
10 Info Level ------------------------------------------- 15
11 Error memory ------------------------------------- 15
12 PIN Menu ------------------------------------------- 16
13 Installing the machine and tables ---------- 19
13.1 Installing the machine ---------------------------- 19
13.2 Building tables ------------------------------------- 19
13.3 Rack guide conversion --------------------------- 19
14 Water connection -------------------------------- 20
14.1 Requirements for the on-site inlet water
connection ------------------------------------------ 20
14.2 Requirements for the on-site water stop cock20
14.3 Connecting the supply hose -------------------- 20
14.4 Connecting the drain hose ---------------------- 20
15 Electrical connection --------------------------- 21
15.1 Connecting the mains cable -------------------- 21
15.2 Establishing an earth connection -------------- 21
15.3 Connection diagram ------------------------------ 22
16 External dosing devices ----------------------- 23
16.1 Terminals -------------------------------------------- 23
16.2 Electrical connection ----------------------------- 24
16.3 Changing the settings ---------------------------- 25
17 Taking the machine out of service for a
long period ---------------------------------------- 25
18 Putting the machine back into service
after a long period of disuse ----------------- 25
19 Technical data ------------------------------------ 26
20 Emissions ------------------------------------------ 26
21 Disposal -------------------------------------------- 26