The Auto Gen Start Menu
975-0082-01-01 3–7
The Auto Gen Start basic menu
The Auto Gen Start basic menu lists settings you may have to adjust
routinely. The System Control Panel displays the Auto Gen Start basic
menu by default.
If you would like additional control over automatic generator starting,
you can find more settings on the Auto Gen Start advanced menu and
AGS Triggers menu (see “Auto Gen Start advanced menu” on page 3–18
and “AGS Triggers menu” on page 3–19). However, you may not have to
adjust these settings as part of regular operation.
The Auto Gen Start basic menu consists of the following items:
• “Gen Status” (status item)
• “Gen Trigger” (status item)
•“AGS Mode”
•“QT Enable”
• “QT Begin”
•“QT End”
•“Start SOC”
• “Start DCV”
•“Enable Temp1”
•“Enable Temp2”
• “Gen Type”
You can record any settings you change in the “User Settings” table on
page 3–36.
To Next Page
Need help?
General