12 Freedom SW 3000 Owner’s Guide
Operating The Freedom SW 3000
This section contains detailed information and procedures for using your
Freedom SW 3000.
If you’re using the SCP to operate or monitor the status of the unit, also
refer to the System Control Panel Owner’s Guide.
Operating the Freedom SW 3000 with the
Optional System Control Panel (SCP)
The SCP provides operating, configuration, and monitoring capability for
your Xanbus system.
The System Control Panel:
• Monitors activity throughout your onboard power system.
• Displays the latest information about your inverter/charger, battery
charge level, battery charge output, and generator start and stop
activity.
• Displays the settings for each Xanbus-enabled device in the system.
• Enables you to adjust the settings for each Xanbus-enabled device in
the system.
• Preserves all of its settings if system power is interrupted. After power
is restored, you don’t have to reconfigure the SCP or any of the
Xanbus-enabled devices connected to it.
This section provides information on operating the Freedom SW 3000 with
the System Control Panel. Please refer to the System Control Panel
Owner’s Guide for complete information on using the System Control
Panel.
LIMITATIONS ON USE
• Do not use in connection with life support systems or other medical
equipment or devices.
• Do not use in ambulances or other life-saving emergency vehicles.
Failure to follow these instructions can result in death or serious
injury.
To Next Page
Loading...
Need help?
General