Xantrex Xanbus System User Manual

Installation
975-0136-01-01 15
Completing the Daisy Chain Layout
To complete the daisy chain layout:
◆ Insert male terminators into the open network ports of the Xanbus-
enabled devices at each end of the network. See Figure 9.
Figure 9 Completing a Daisy-Chain Layout
CAUTION: Unpredictable device behavior
After connecting the Xanbus-enabled devices and terminating the network, do
not plug terminators or other cables into any remaining open network ports on
any Xanbus-enabled devices.
Do not connect one end of the network to the other to make a ring.

Xantrex Xanbus System Specifications

General

Brand	Xantrex
Model	Xanbus System
Category	Inverter
Language	English