Xerox 4595 Customer Expectation Document

Optional Finisher/Folder, FFPS, and OHCF
The following illustration shows the space requirements and service space envelope with the
optional Finisher/Folder, optional FreeFlow Print Server, and optional OHCF installed. For other
configurations, consult the Module Dimensions chart.
NOTE 1: The dimensions shown are absolute minimums.
NOTE 2: 78" (1981 mm) minimum height clearance in service envelope.
NOTE 3: Location of left rear corner of main processor should be marked with tape for delivery
personnel. (See diagram above)
NOTE 4: If there is no HCF or OHCF attached, then the Multi-Sheet Inserter, in the closed
position (3.3”/83 mm), must be calculated in the space requirements.
Printer System Dimensions
Service/Operational Space Moveable
Installation
Stationary
Installation
Rear of main processor/system 10 in (254.0 mm) 24 in (609.6 mm)
Front of main processor 54 in (1,371.6 mm) 54 in (1,371.6 mm)
Front of HCF and finisher/folder 38 in (965.2 mm) 38 in (965.2 mm)
Side of system 24 in (609.6 mm) 24 in (609.6 mm)
Height of system 78 in (1981 mm) 78 in (1981 mm)
NOTE: Moveable installation dimensions can be used when the system is installed on a hard
surface such as concrete, wood, and/or mobility plate.
Module Configurations Width Depth Height Weight
Main Processor and Base Finisher 71.9 in (1825
mm)
31 in (787
mm)
57.3 in (1455
mm)
840 lbs (381
kg)
Main Processor and Booklet
Maker
72.1 in (1830
mm)
31 in (787
mm)
57.3 in (1455
mm)
895 lbs (406
kg)
Main Processor, Base Finisher
and Folder
79.7 in (2025
mm)
31 in (787
mm)
57.3 in (1455
mm)
983 lbs (446
kg)
Main Processor, Booklet Maker
and Folder
79.9 in (2030
mm)
31 in (787
mm)
57.3 in (1455
mm)
983 lbs (446
kg)
Main Processor, Base Finisher
and HCF
92.4 in (2346
mm)
31 in (787
mm)
57.3 in (1455
mm)
1151 lbs (522
kg)
Main Processor, Booklet Maker
and HCF
92.5 in (2351
mm)
31 in (787
mm)
57.3 in (1455
mm)
1204 lbs (546
kg)
Main Processor, Base Finisher,
Folder and HCF
100.1 in
(2543 mm)
31 in (787
mm)
57.3 in (1455
mm)
1279 lbs (580
kg)
Main Processor, Booklet Maker,
Folder and HCF
100.3 in
(2548 mm)
31 in (787
mm)
57.3 in (1455
mm)
1332 lbs (604
kg)
Main Processor + Base Finisher +
OHCF
111”/ 2819.4
mm
63”/ 1600.2
mm
94.3”/
2395.2 mm
1094 lbs./
496.2 kg
Main Processor + Booklet Maker +
OHCF
111”/ 2819.4
mm
63”/ 1600.2
mm
94.3”/
2395.2 mm
1149 lbs./
521.2 kg
20

Xerox 4595 Specifications

General

Brand	Xerox
Model	4595
Category	Copier
Language	English