Safety Instructions
Xerox 8254E / 8264E Color Wide Format Printer
User Guide
1-4
• Do not use aerosol cleaners. Aerosol cleaners can be explosive or flammable when used on
electromechanical equipment.
• Always exercise care when moving or relocating equipment. Please contact your local Xerox Service
Department to arrange relocation of the copier to a location outside of your building.
• Always locate the machine on a solid support surface (not on plush carpet) that has adequate
strength to support the weight of the machine.
• Always locate the machine in an area that has adequate ventilation and room for servicing.
• Always unplug this equipment from the electrical outlet before cleaning.
• Never attempt any maintenance function that is not specifically described in this documentation.
• Never locate the machine near a radiator or any other heat source.
• Never override or “cheat” any of the electrical or mechanical interlock devices.
• Never place this equipment where people might step on or trip on the power cord.
• This equipment should not be placed in a room unless proper ventilation is provided. Please
contact your local Authorized dealer for further information.
• The power receptacle for the machine must meet the requirements stated on the data plate on the
rear of the machine. If you are not sure that your electrical supply meets the requirements, please
consult your local power company or an electrician for advice.
• Use the power cable that is supplied with your machine. Do not use an extension cord or remove or
modify the power cord plug.
• Do not override or disable electrical or mechanical interlock devices.
• Do not push objects into slots or openings on the machine. Electrical shock or fire may result.
• The power cable is the disconnect device for this equipment. It is attached to the back of the
machine as a plug-in device. To remove all electrical power from the equipment, disconnect the
power cable from the electrical outlet.
• Any operator product maintenance procedures will be described in the user documentation
supplied with the product.
• Do not carry out any maintenance on this product which is not described in the customer
documentation.
• Store all consumables in accordance with the instructions given on the package or container.
• Keep all consumables away from the reach of children.
• Wire the various cables as directed in the User Guide. Incorrect wiring could cause a fire.
• Be sure to use the power cable(s) supplied with the printer. Using other power cables can cause an
electric shock or fire.
• Make sure to use only the type of electrical power specified for your printer (AC 100 V - 120 V or AC
220 V - 240 V). If other than the specified voltage is used, it could cause an electric shock or fire.
• Plug the printer directly into the building’s electrical outlet (AC 100 V - 120 V or AC 220 V - 240 V).
Do not plug multiple power supply cables into the same electrical outlet. Doing so could generate
heat and might cause a fire.
• Be sure to use a dedicated building electrical outlet with a ground wire for the power supply, and
connect it to the ground wire. If the ground wire is not connected, an electric shock or fire may
occur.
• The waste fluid from the printer is industrial waste. Proper waste fluid disposal according to
industrial waste disposal laws and ordinances of your local government is required. Consign
disposal of waste fluids to a specialized processor.
To Next Page
Loading...
Need help?
General
