EasyManuals Logo
Home>Xerox>Printer>8264E

Xerox 8264E User Manual

Xerox 8264E
260 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #115 background imageLoading...
Page #115 background image
Handling the Printer
Xerox 8254E / 8264E Color Wide Format Printer
User Guide
4-31
8254 Effect Menu
Setup item Setting Description
Effect None 1 The Effect function is not used.
If obvious white lines or uneven print density appear on
printed media while set at "None 1," set to "None 2."
None 2
Wave 1 The printing joint will be the wave form.
It should result in improved print quality.
If obvious white lines or uneven print density appear on
printed media while set at "Wave 1," change the setting to
"Wave 2."
Wave 2
Fuzz 1 The printing joint will shade off as the wave form.
If obvious white lines or uneven print density appear on
printed media in "Wave," set to "Fuzz 1."
If obvious white lines or uneven print density appear on
printed media in "Fuzz 1", set to "Fuzz 2."
Fuzz 2
<Fine&Wave 1> Performs printing at a slower speed than "Wave."
Set up this menu if you need to improve the print quality
compared with "Wave."
If obvious white lines or uneven print density appear on
printed media in "Fine&Wave 1," change the setting to
"Fine&Wave 2, 3, or 4" ... whichever one produces the best
result.
Fine&Wave 2
Fine&Wave 3
Fine&Wave 4
A-S.Fine&Wave Performs "Wave" printing using only one side of the print
head’s nozzles (designated as the A
side).
Since only half of the print head’s nozzles are used, the
time to print is twice as long as it is when "Wave 1, 2, 3, or
4" is used.
Set up this menu if you need to improve the print quality
compared with "Fine&Wave 1 to 4."
Effect (cont.) B-S.Fine&Wave Same as immediately above. Performs "Wave" printing
using only half of the print head’s nozzles but uses the
other
side nozzles (designated as the B side).
Again, since only half of the print head’s nozzles are used,
the time to print is twice as long as it is when "Wave 1, 2, 3,
or 4" is used.
Set up this menu if you need to improve the print quality
compared with "Fine&Wave 1 to 4."
•Pressing the [Enter] key saves the setting and shifts to the
previous menu.
•Pressing the [Cancel] key cancels the setting and shifts to
the previous menu.
Setup menu Setup item 1 of 7 total)

Table of Contents

Other manuals for Xerox 8264E

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox 8264E and is the answer not in the manual?

Xerox 8264E Specifications

General IconGeneral
BrandXerox
Model8264E
CategoryPrinter
LanguageEnglish

Related product manuals