Copy
CCooppyy OOvveerrvviieeww
To make a copy, the device scans your original documents and temporarily stores the
images. It then prints the images based on the options that you selected. You can
change settings for individual jobs based on the original documents. You can save
settings that you use for regular jobs and retrieve them for later use.
For information about all the Copy App features and available settings, refer to Apps Features.
For details on configuring and customizing the Apps, refer to the System Administrator Guide at www.
xerox.com/office/ALC81XXdocs.
If authentication or accounting is enabled on your device, to access features, enter your login details.
For details about Personalization for logged-in users, refer to Personalize.
AAppppllyyiinngg aanndd DDeetteeccttiinngg IImmaaggiinngg SSeeccuurriittyy MMaarrkkss
Imaging Security uses infrared light to track and manage sensitive documents.
If the Infrared Security option is enabled in the Embedded Web Server, the device can apply and
detect concealed marks using infrared technology. This method of marking and detection can prevent
the accidental disclosure of confidential documents.
Security marks can be set to apply to copy jobs. When Apply Mark is enabled, the location of the
security mark on the page is set. When you run your copy jobs, the mark is applied to the specified
location on your output automatically.
Note: If infrared marks are configured to apply to copy jobs and Annotations is selected, the
page position used for the concealed mark is unavailable to use for the annotation.
The system administrator can configure Infrared mark detection for copy jobs. When Detect Mark is
enabled, the device detects security marks on documents that are scanned. When an infrared mark is
detected during scanning, depending on the settings configured, the device inhibits the job, sends an
email alert and continues the job, or sends an email alert and inhibits the job. When a security mark is
detected, the device adds an entry to the Audit Log.
If a security mark is detected and the copy job is allowed to continue, a new mark is applied to the
job output, even if Apply Mark is not enabled. The new security mark includes updated tracking
information.
If a security mark is detected on your job, a message appears at the control panel to indicate the
action taken. For more information about Imaging Security, contact your system administrator, or
refer to the System Administrator Guide at www.xerox.com/office/ALC81XXdocs.
MMaakkiinngg aa CCooppyy
To make a copy:
102
Xerox
®
AltaLink
®
C81XX Series Color Multifunction Printer
User Guide
Xerox® Apps
To Next Page
Loading...
Need help?
General
