4. Load the paper in the tray.
• For long-edge feed printing:
• Load letterhead and pre-printed paper face up with the top edge toward the front.
• Load hole-punched paper with the holes to the right.
• For short-edge feed printing:
• Load letterhead and pre-printed paper face up with the top edge to the right.
• Load hole-punched paper with the holes toward the rear.
Note: Do not load paper above the maximum fill line. Overfilling can cause paper jams.
5. Adjust the width guides until they touch the edges of the paper.
6. At the control panel, select the correct paper size, type, and color.
• If letterhead paper is loaded in the printer, for type, select Letterhead.
• If pre-printed paper is loaded in the printer, for type, select Pre-printed.
7. To confirm the settings, touch Confirm.
204
Xerox
®
AltaLink
®
C81XX Series Color Multifunction Printer
User Guide
Paper and Media