LLooaaddiinngg PPaappeerr iinn tthhee BByyppaassss TTrraayy
The Bypass Tray supports the widest variety of media types. The tray is intended primarily for small-
quantity jobs that use special media.
To load paper in the Bypass Tray:
1. Open the Bypass Tray. If the tray is loaded with paper, remove any paper that is a different size
or type.
Note: For larger paper sizes, pull out the extension tray.
2. Move the width guides to the edges of the tray.
3. Flex the sheets back and forth and fan them, then align the edges of the stack on a level surface.
The procedure separates any sheets that are stuck together and reduces the possibility of jams.
Note: To avoid jams and misfeeds, do not remove paper from its packaging until you are
ready to use it.
Xerox
®
AltaLink
®
C81XX Series Color Multifunction Printer
User Guide
203
Paper and Media
To Next Page
Loading...
Need help?
General
