Scanning with the ISIS Interface
100 DocuMate 250 Scanner User’s Guide
Scanning with the ISIS
Interface
The ISIS interface for scanning is available using the Scan button
when the One Touch software is set to Configure Before Scan
and the ISIS driver has been selected.
The interface is also available from ISIS scanning applications,
such as the QuickScan application that you may have received
with your scanner. If you are using an ISIS application to scan,
please see its User’s Guide for the steps to open the interface.
To open the ISIS interface from the One Touch window, right-click
on the Configure Before Scan configuration and select ISIS from
the menu.
Right-click on
Configure Before Scan
to get the menu, and
choose ISIS to use the
ISIS as the interface to
configure before scan.
To Next Page
Loading...
Need help?
General