DocuMate 250 Scanner User’s Guide 105
Scanning with the ISIS Interface
Scanning with ISIS from Other Applications
You can also use the ISIS interface to scan from the QuickScan
software that you received with your scanner on the Disc 1 CD.
Note that the ISIS interface for the other applications may vary
from the descriptions provided in this User’s Guide.
If you open the QuickScan software to scan directly from it, you
may see the following warning message:
1. Please disregard this message and click Continue.
The Pixel Translations ISIS drivers were installed correctly
during the installation of your Xerox DocuMate 250 scanner.
The Scanner Selection dialog box will then open.
2. Select Xerox DocuMate 250 from the list of scanners and click
OK.
Your scanner is then ready to work with the QuickScan ISIS
driver.