Maintenance
Phaser 6000/6010 Color Printer
User Guide
16
Cleaning the Printer
This section includes:
• General Precautions on page 16
• Cleaning the Exterior on page 17
• Cleaning the Interior on page 17
General Precautions
To avoid damaging the printer, follow these guidelines:
• Do not place anything on top of the printer.
• Do not leave the covers and doors open for any length of time, especially in well-lit places. Light
exposure can damage the imaging units.
• Do not open covers and doors during printing.
• Do not tilt the printer while it is in use.
• Do not touch the electrical contacts, gears, transfer belt, transfer roller, or fuser. Doing so could
damage the printer and cause the print quality to deteriorate.
• Make sure any parts removed during cleaning are reinstalled before you plug in the printer.
CAUTION: When cleaning your printer do not use organic or strong chemical
solvents or aerosol cleaners. Do not pour fluids directly into any area. Use supplies
and cleaning materials only as directed in this documentation.
WARNING: Keep all cleaning materials out of the reach of children.
WARNING: Internal parts of the printer can be hot, especially the fuser. Use caution
when doors and covers are open.
WARNING: Do not use pressurized air-spray cleaning aids on or in the printer. Some
pressurized air-spray containers contain explosive mixtures and are not suitable for
use in electrical applications. Use of such cleaners can result in a risk of explosion
and fire.
WARNING: Do not remove the covers or guards that are fastened with screws. You
cannot maintain or service any parts that are behind these covers and guards. Do
not attempt any maintenance procedure that is not described in the documentation
supplied with your printer.
To Next Page
Loading...
Need help?
General