EasyManuals Logo
Home>Xerox>Printer>PHASER 6010

Xerox PHASER 6010 User Manual

Xerox PHASER 6010
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #56 background imageLoading...
Page #56 background image
Troubleshooting
Phaser 6000/6010 Color Printer
User Guide
56
Performing an Automatic Color Registration Adjustment
Use the following procedure to perform the automatic color registration adjustment.
Note: An automatic color registration adjustment is performed every time a new toner cartridge is
installed.
1. On the printer control panel, press the Menu button.
2. Press the Down Arrow button to go to Admin Menu and then press the OK button.
3. Press the Down Arrow button to scroll to Maintenance Mode and press OK.
4. Press the Down Arrow button to scroll to Adjust Color Regi and press OK.
5. At Auto Adjust, press OK.
6. At the prompt, Are you sure?, press OK to begin the calibration.
When the adjustment is complete, Ready appears on the printer control panel.
Manual Color Registration at the Phaser 6010 Printer
You can fine-tune color registration by performing a manual adjustment. Manual color registration
adjustment is a three-step process:
1. Printing the Color Registration Correction Chart on page 56.
2. Determining the Color Registration Values on page 56.
3. Entering Color Registration Value at the Control Panel on page 57.
Printing the Color Registration Correction Chart
Note: The following procedure can also be performed using the Printer Setting Utility. For details,
see Printing the Color Registration Correction Chart With the Printer Setting Utility on page 54.
1. On the printer control panel, press the Menu button.
2. Press the Down Arrow button to go to Admin Menu and then press the OK button.
3. Press the Down Arrow button to scroll to Maintenance Mode and press OK.
4. Press the Down Arrow button to scroll to Adjust Color Regi and press OK.
5. Press the Down Arrow button to scroll to Color Regi Chart and press OK.
The Color Registration Chart prints.
6. Continue to Determining the Color Registration Values on page 56 to determine if an adjustment is
necessary.
Determining the Color Registration Values
The Color Registration Chart shows horizontal and vertical values for each color. The color registration
marks are grouped on the chart as follows:
Vertical registration values are at the top of the page:
Y = Paper feed direction yellow
M = Paper feed direction magenta
C = Paper feed direction cyan

Table of Contents

Other manuals for Xerox PHASER 6010

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox PHASER 6010 and is the answer not in the manual?

Xerox PHASER 6010 Specifications

General IconGeneral
BrandXerox
ModelPHASER 6010
CategoryPrinter
LanguageEnglish

Related product manuals