Xerox PHASER 6010 User Manual

Troubleshooting
Phaser 6000/6010 Color Printer
User Guide
57
Left side registration values are on the left side of the page:
•LY = Left yellow
•LM = Left magenta
• LC = Left cyan
Right side registration values are on the right side of the page:
• RY = Right yellow
• RM = Right magenta
• RC = Right cyan
To determine the vertical values:
1. In the upper section of the Color Registration Chart, vertical color lines are printed in gaps between
corresponding vertical black lines. The line sets are in color groups: Y, M, or C. Each set of lines has a
corresponding number printed above it. In each color group, identify the set of lines in which color
line is perfectly aligned between the corresponding black lines. Refer to the enlarged illustration on
the chart that shows how to determine the closest number.
2. For each color, do one of the following:
• If zero (0) is the value on the color set that is most closely aligned, you do not need to adjust
that color.
• If zero (0) is not the value on the color set that is most closely aligned, circle the number that is
closest.
To determine the horizontal values:
1. In the left and right sections of the Color Registration Chart, horizontal color lines are printed in the
gaps between corresponding black lines. Each group of lines is arranged in a group under the
corresponding letters LY, LM, LC, RY, RM, and RC. Each set of lines has a corresponding number
printed to the right of it. In each color group, identify the set of lines in which color line is most
closely aligned between the corresponding black lines. Refer to the enlarged illustration on the
chart that shows how to determine the closest number.
2. Proceed to determining the vertical values described in the following procedure:
• If zero (0) is the value on the color set that is most closely aligned, you do not need to adjust
that color.
• If zero (0) is not the value on the color set that is most closely aligned, circle the number that is
closest.
3. If it is necessary to make any horizontal or vertical adjustments, proceed to Entering Color
Registration Value at the Control Panel on page 57.
Entering Color Registration Value at the Control Panel
Note: The following procedures can also be performed using the Printer Setting Utility. For details,
see Entering Color Registration Values With the Printer Setting Utility on page 55.
Using the printer control panel, enter the values that you found in the Color Registration Correction
Chart to make adjustments.
1. On the control panel, press the Menu button.
2. Press the Up Arrow or Down Arrow button to select Admin Menu, then press the OK button.

Xerox PHASER 6010 Specifications

General

Brand	Xerox
Model	PHASER 6010
Category	Printer
Language	English