Xerox Phaser 6022 User Manual

Installation and Setup
42 Xerox
®
Phaser
®
6022 Printer
User Guide
Configuring Network Settings
This section includes:
• About TCP/IP and IP Addresses ..................................................................................................................................... 42
• Finding the IP Address of the Printer Using the Control Panel ........................................................................ 43
• Assigning the Printer IP Address .................................................................................................................................... 44
About TCP/IP and IP Addresses
Computers and printers use TCP/IP protocols to communicate over a network. Macintosh computers use
either TCP/IP or the Bonjour protocol to communicate with a network printer. For Macintosh OS X
systems, TCP/IP is preferred.
With TCP/IP protocols, each printer and computer must have a unique IP address. Many networks as well
as cable and DSL routers have a DHCP server A DHCP server assigns an IP address to every computer and
printer on the network that is configured to use DHCP, automatically.
If you are connected to the Internet using cable or DSL, check with your carrier for information on IP
addressing.

Xerox Phaser 6022 Specifications

General

Brand	Xerox
Model	Phaser 6022
Category	Printer
Language	English